If the reception fails once in the later synchronization, the icon will disappear.When the RF is successfully registered, the icon is displayed.Long press the “▲” button for two seconds to re-register data for the current channel. During RF registration, the antenna icon starts to flash.RF reception lasts for up to 3 minutes.Long press the “▲” button for two seconds to re-register data for the current channel.The weather station automatically receives RF signals for 3 minutes after the weather station is plugged in.If signal of the sensor is not received by the weather station, the symbol “-” will appear on the The icon of channel number flashes in sequence of 1, 2, and 3. Step 3: Short press the ▲ button to select the channel number that has been set on the wireless sensor in the previous step. Please ensure the wireless range between the weather station and the sensor is within 200 feet (60 m).Since the cover of the sensor is designed to be splash-resistant, it may take 36-48 hours for the sensor to measure temperature readings that are relatively accurate.Please keep your weather station away from concrete walls, cellars, metal doors and equipment that generates magnetic fields such as mobile phones, televisions, etc.Step 2: Insert the batteries in the wireless sensor and use the TX channel selector to choose the desired transmission channel (1, 2 or 3). One of these is included in the package while you can choose to purchase two more sensors separately if necessary. This weather station is able to pair with three wireless sensors. ![]() Instead, please use the included power adapter. Please do not use batteries as main power supply (you will not be able to operate the weather station when it is only powered by batteries). Note: Batteries are only used to save the setting of your clock. Default Projection Setting: long-term projection.Default Time: 12:00, 12-hour time format.Then the clock begins to search for RF signals (3 minutes, for temperature readings) and WWVB signals (3 minutes, for time calibration). The LCD display lights up with all the icons for 2 seconds and 3 beeps when plugged in.Press Turn off alarm Turn off alarm Turn off alarm Turn off alarm Turn off alarm Turn off alarm Activate snooze Hold - Turn off snooze Features: Get out of the Alarm Setting Mode Light up projection for 15s (if you have chosen short-term projection ) Advance 8 steps per second Go back 8 steps per second Get out of the Time Setting Mode Light up projection for 15s (if you have chosen short-term projection ) Short-term projection (light up for for 15s) Signal Reception (Time Calibration) (Manually)Ĭlear memory Switch from long-term projection (stay lit all the time) into Projection into short-term projection) The projection lights up for Readings, Dew Point Tempera- ture, and Heat Indexįlip the projection for 180 degrees (After you switch long-term Indoor Comfort Index Function of Buttons: Button.Temperature (Take turns displaying indoor and outdoor temperature every 5s) Two Projection Modes: Time & Indoor Temperature, Time & Outdoor 7 buttons: (SET), (ALARM), ▲ (+ / CH), ▼ (- / C / F), (MEM), (Rotate / Projection), (SNZ / LIGHT)Ģ switches: (ALARM 1 On / Off Switch), (ALARM 2 On / Off Switch). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |